Picking up bobbin thread, Recogida del hilo de la bobina – SINGER 132Q FEATHERWEIGHT User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PICKING UP BOBBIN THREAD

1. Raise the presser foot lever.

2. Holding needle thread loosely by your left hand, turn hand wheel

3. Lightly pull up the top thread, and pick up bobbin thread, which will

appear through the needle plate slot.

towards you by your right hand until the needle comes to its highest 4. Pull both top and bobbin threads together towards back of machine

position.

under the presser foot, leaving about 6” (15 cm) clear.

RECOGIDA DEL HILO DE LA BOBINA

1. Alzar la palanca del pie prénsatelas.

2. Manteniendo flojo el hilo de la aguja con la mano izquierda, girar

3. Tirar ligeramente del hilo superior y recoger el hilo de la bobina, que

aparecerá a través de la abertura de la plancha de aguja.

hacia Vd. el volante con la mano derecha, hasta que la aguja alcance 4. Tirar de ambos hilos juntos, hacia atrás de la máquina, por debajo

su posición más alta.

del pie prénsatelas, dejando alrededor de 15 cm. de hilo.

11

Advertising
This manual is related to the following products: