Maytag MER4530 - Manual (Page 11)

Setting the Knob Control(s) for
Baking and Roasting
(select models)
Off
BROIL
500
450
WARM
200
250
400 300
OVEN SET
(Canadian Models)
350
OVEN TEMP
The OVEN TEMP knob is used to select and maintain the
oven temperature. Always turn this knob just TO the desired
temperature. Do not turn to a higher temperature and then back.
The OVEN SET (Canadian Models) knob determines the type
of oven operation. Turn this knob to the desired setting. Each
setting is identified by an indent (stop) and a click sound.
The oven will not operate if the OVEN SET knob is left in the
OFF position.
BROIL
500
450
WARM
200
250
OVEN SET
(Canadian Models)
350
OVEN TEMP
1. When cool, position rack in oven.
2. Turn OVEN TEMP knob to desired temperature.
3. Turn OVEN SET knob to BAKE (Canadian Models).
4. Place food in center of oven.
5. Check food for doneness at minimum time in recipe.
Cook longer if necessary.
6. Remove food from the oven and turn the OVEN SET
(Canadian Models) and OVEN TEMP knob(s) to OFF.
Oven Indicator Light (select models)
The oven indicator light, located on the backguard, turns
on whenever the oven turns on.
When the oven reaches the preset temperature, the indi­
cator light turns off. The oven indicator light will then
turn off and on as the oven elements cycle off and on.
Oven Vent
When the oven is in use, the area near the oven vent
opening may feel warm or hot to the touch. Never
block the vent opening.
OVEN VENT LOCATION
On a coil element surface, be sure the drip bowl in the
vent location has a hole in the center. Do not cover the
drip bowl with aluminum foil.
OVEN VENT
OPENING
Oven Light
Push the switch on the backguard to turn the oven
light on and off.
1 0