Isii ■ ■■ .■’-c'fl, 5v"i – SINGER W4042 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Page 18
..." .--ISii
■ ■■ .■’-C'fl
■'.' ■ ' '• -■ "‘s'.'vVV'íf
.
5v"i
Section.^
■F
English
Fold the handle back.
Insert spool pin.
Español
Mover hacia atrás la manija.
Levantar el porta carretel.
Put a spool of thread on spool
pin.
Draw thread from spool pin
through thread guide and pre
tension device; following num
bers © and
®.
Wind thread clockwise around
bobbin several times.
Push bobbin onto spindle.
Move the declutch knob in the
handwheel to the ( J ) direc
tion. Before starting to wind
bobbin, please make sure the
groove in the bobbin is located
into the lug on the spindle so
the bobbin is all the way on
spindle.
Note: Unless groove and lug
are located correctly,
bobbin winding cannot
be done successfully.
Colocar un hilo en el porta
carretel.
Pasar el hilo del porta carretel
como se muestra en el dibujo,
(pasos © y @)
Enredar el hilo varias veces
alrededor del carrete en direc
ción a las manecillas del reloj.
Colocar el carrete sobre el eje.
Mover
el
botón
que
se
encuentra en el volante hacia
el dibujo ( B ). (indicando el
carrete).
Antes de empezar a bobinar la
canilla,
asegúrese
que
el
hueco de la canilla esta bien
fijado en el saliente del pivote.
Nota; ¡Puede ser peligroso!
A menos que el hueco
el saliente no esten
ajustados, el bobinar no
se podrá hacer correc
tamente.