SINGER W4042 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Page 20
Sectiorí
Guide thread into slot (D of
bobbin case.
Español
Guiar el hilo por la ranura
de la caja porta bobina.
Pulling thread to left, bring it
under tension spring then to
delivery eye ®.
Raise the needle to the high
est position.
Leave end of thread about 10
cm (4”) from bobbin case.
Take hold of latch and push
bobbin case into shuttle, as
illustrated.
Release latch when bobbin
case is fully inserted.
Press firmiy on bobbin case to
be sure it is locked in place.
Extraer el hilo hacia la izquier
da, conducirlo hacia abajo del
resorte de tensión y luego
pasarlo por la ranura ®.
Levantar la aguja a su posi
ción más alta.
Dejar en el extremo del hilo
unos 10 cm fuera de la bobina.
Tomar el seguro de la bobina
y empujarla hacia adentro del
cangrejo, como se indica.
Soltar el seguro cuando la
bobina esté completamente
adentro deftangrejo