SINGER W4042 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Page 46
Sectioní
Draw design on material to be
used as an appliqué and cut it
out. Place cut-out on base fab
ric with stabilizer under base
faDric and baste or pin in
place.
Sew around the outline with
satin zigzag stitch.
Español
Dibujar el diseño sobre el
material que se va a utilizar
como parche de adorno y
recortarlo.
Colocar el parche de adorno
sobre el material hilvanarlo.
Coser alrededor del molde
con puntada en zig-zag.
D
d
change direction at cor-
'r D sew very small cir-
:he machine, posl-
.¡o.iir;c ::,eais just away from
edge of cut-out, lift presser
foot and turn fabric. Lower
presser foot and continue
sewing.
Para cambiar la dirección en
las esqiuinas o par coser en
circuios muy pequeños, parar
la máquina, colocar la aguja
en la punta de ia orilla del
parche, levantar el pie prén
satela y girar el material.
Después bajar el pie prén
satela y continuar la costura.