SINGER W910 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SELECTION OF PRESSER FOOT

Straight Stitch Foot

This has only a narrow hole to accom­
modate only straight stitching. It may be

used on sheer or soft fabrics for more

control. When using this foot, the Stitch

Width should be

0

to avoid hittinq^th^

joot and breaking the needleT ~

Buttonhole Foot

This foot has a groove underneath, to

allow the narrow satin stitch or button­
hole to form evenly. However, if skip-

stitch occurs on sheer fabrics with this
foot, it may be necessary to use thin

paper underneath.

Cording or Zipper Foot, and Button Foot

Use for sewing very close to the edge of a

cord or zipper, and sewing on buttons
respectively.

CHANGING FOOT

Use the large screwdriver to loosen thumb

^rew. Turn the screw backward until the
foot becomes loose. Then, lift up on

presser foot lever until it is in its highest

position in order to remove the foot.
R^eplace with desired foot and tighten

thumb screw securely.

Advertising