SINGER W910 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use slightly shorter stitch length
than that of the rest of the seams.
On the part where elasticity is
required on the seam, sew by
stretch stitch. The cloth guide may
be used on angle as shown.
SEWING ACROSS HEAVY
hold the fabric upward on an angle
so that the heavy seam falls under
the front curved sled of presser
REMOVING THE WORK
Be sure to stop the machine when
the thread take-up lever or needle
is at the highest position.
Now raise the presser foot and draw
the fabric back and to the left
and pass the threads over the
Pull down slightly, holding thread
in both hands, so as not to bend the
Leave the ends of threads under
the presser foot.