SINGER W910 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

1. Take-up

2. Pressure Control

3. Top Thread Guides

4. Stitch Pattern Selector

5. Stretch Stitch Control


. Stitch Width Control

7. Stretch Stitch Pattern



. Bobbin Winder

9. Hand Wheel

10. Stitch Length Control

11. Reverse Button

12. Feed Dog Height


13. Needle Plate

14. Presser Foot

15. Feed Dog

16. Slide Plate

17. Check Spring

18. Light Switch

19. Face Plate

20. Tension Dial

21. Needle Clamp

22. Spool Pins

23. Automatic Reverse

Stitch Tuner

24. Bobbin Winder

Tension Disc

25. Presser Foot Lever

26. Thread Cutter

27. Thumb Screw
28. Head Hinge Holes

29. Clutch-nut

Allways at its highest position when beginning or end­

ing sewing.

For regulating the pressure on fabric.

For leading thread to Tension Control for sewing.

For selecting the stitch pattern and buttonholing steps.

For changing ordinary stitch to triple back-and forth

stitch (stretch stitch).

For setting stitch width.

Cro^-reference by number between- ordinary stitch

patterns and stretch stitch patterns performed with
stretch stitch control ring at "SS".

For winding thread on bobbin.

For the control of the up and down movement of the

For selecting stitch length between no feeding and max

to about


stitches per inch.

For easy backtacking to lock thread ends by pushing the

For regulating feed dog height for various materials and

types of sewing.

With guide lines for sewing accuracy.

For holding fabric when sewing.

Diamond point to move fabric accurately.

For opening an access to bobbin and bobbin case.

For automatic precise adjustment of flow of upper


For turning on or off the light inside face cover.

Hinge-open type for replacemerit of light bulb and

For regulating the amount of tension on upper thread.

For holding needle in place in the slot of needle bar.

For holding spools, preventing over-spin of spools.

For adjustments for the buttonhole reverse stitch den­

sity and the evenness df the back-and-forth stitch lengths

of stretch stitch.

For providing proper tension on thread when bobbin

For lifting or lowering presser bar and presser foot.

For convenience to cut both upper and lower threads

after sewing.

For tightening presser foot in place on presser bar.

For installation of machine head onto portable case or

For the releasing movement of the needle bar in order

to wind bobbin.