Removing and attaching the presser foot to remove, To attach – SINGER W1911 Quilter's Friend User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING AND ATTACHING THE PRESSER FOOT
To Remove:
1. Turn the hand wheel towards you until the needle is at the highest position. Raise
the presser foot by lifting the presser foot lift.
2. By lifting the lever on the back of the foot holder, the presser foot will drop off.
Note: * Do not force the presser foot to remove it.
To Attach:
1. Place the presser foot so that the pin on the foot lies just under the groove of the
foot holder. Lower the foot holder.
2. When the presser foot lift is raised, you’ll find the presser foot is locked in place.
13-
Advertising