Cleaning the shuttle race (bobbin area) – SINGER W1911 Quilter's Friend User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING THE SHUTTLE RACE (Bobbin Area)
Unplug the machine from the power supply.
To remove shuttle:
Raise needle to its highest position and remove bobbin case.
Turn levers away from shuttle and lift out retaining ring and shuttle,
by grasping center pin.
Clean the under side of feed teeth with a small brush. Remove lint
and thread from all parts of shuttle and wipe with a lightly oiled
cloth.
To reassemble.
Hold shuttle by center pin and place carefully back into the shuttle
race, forming perfect circle with shuttle driver.
Replace retaining ring polished side out, making sure the bottom
pin fits into notch. Lock retaining ring by turning levers back into
position. Replace bobbin case with bobbin.
33-