SINGER 611 - Manual (Page 20)

STITCH LENGTH INDICATOR
Numerals on the left side of the indicator repre­
sent the number of stitches per inch. Numerals on
the right side represent stitch length in millimeters.
A superfine control cam be made in case of siitdx
lengths less than 1 mm or stitches per inch {20),
The greatest stitch length of 4 mm or 6 stitches
per inch can be locked in place when stitching folds,
pleats or multiple layers of heavy fabric.
To set stitch length: Loosen by turning thumb nut
to the left as shown. Position lever for desired stitch
length. Tighten by turning thumb nut to the right.
By raising the stitch length regulator to the hig­
hest point, reverse stitching is accomplished at the
same stitch length as forward. When in locked
position, 4 mm or stitches per inch (6) cannot be
reversed. If reverse stitching is desired with this
stitch length position, turn thumb nut to the left
until the stitch length regulator can be adjusted to
its highest point at reverse stitching.
18
UNLOCKS
REVERSE
FORWARD
\
.2'
'Nv
V
LOCKS