SINGER 611 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUTTONHOLBS
Stltcbiag Procediire. Set Seiector and stitdi width lever. Place work under the needle, aligning the
center marking of buttonhole with center score line of foot.
To form side stitching, turn hand wheel toward you so the needle enters fabric at point A. Lower foot
and stitch to end of marking. Leave needle in fabric at point B. Raise foot, pivot work on needle. Lower
foot. Take one stitch without changing stitch width lever setting, bringing work to poird C. Adjust to
stitch width lever setting for bar tadcs and take no less than six stitches. Stop at point D. Readjust to
stitch width lever setting for side stitching. Complete to point B. Move to stitch width lever setting for bar
tacks and duplicate tack previously made, ending at point F.
53