SINGER 611 User Manual
Page 93
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO CLEAN THE MACHINE
Clean and
Oil
Clean between
tension discs
Clean and Oil
Your sewing macnine was built to exacting stand
ards of precision and workmanship. Its performance
depends on the care and treatment it receives when
in use and before storing it away.
When in regular use the machine should be
cleaned periodically to remove the lint and fluff
which may have accumulated around the working
parts. To clean the bobbin case area, see instruc
tions for removing and replacing bobbin case on
pages 92 and 93. Oil the machine after each cleaning
as instructed on pages 94, 95 and 95.
If the machine is to be stored away for an inde
finite period of time, a thorough brush-cleaning
to remove all traces of lint and fluff, followed by
swabbing of all exposed parts with a lint-free brush
saturated with SINGER’^ Oil, is necessary to protect
the machine against rust damage. The areas that
should be cleaned and covered with a protective
coat of oil are shown in the illustration at the left.
91