SINGER 611 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BUTTON SEWING FOOT
Set stitch width lever at 4. The needle should then
enter into the right hole of the button. Take appro
ximately six zigzag stitches in this position. End on
the left side.
To fasten stitching, adjust to number one stitch
width lever setting and take approximately three
stitches.
THREAD SHANK
In order to form a shank, stitching is done ovpr
a regular machine needle. Position button and lower
button foot. Place needle in the groove of the foot
so the point enters the hole,
A larger shank results when the heavy end of
the needle is utilized.
6 1
Advertising