SINGER 611 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE ZIPFER FOOT
©
^ <5
iS 1S iS
This foot is designed to facilitate the placement of stitching close
to a raised edge. The hinged feature of this foot insures even feeding
over oins, heavy lavers of fabric or cross seams. It is attached to the
machine in place of the regular presser foot, and may be adjusted to
either the right or left side of the needle. Straight stitch or zigzag
settings mav be used.
^
A
APPLICATIONS
Zipper Insertions
Tabular Coidmg
Corded Seams
Slip Cover Welting
Preparation. Secure the zipper foot to the presser
bar as you would the regular presser foot. Set Selec
tor and stitch width lever. Adjustment to the right
or left of the needle is made by loosening the
72
thumb screw at the bach. Check the position of the
foot bv lowering the needle into the side notch,
making sure it clears the foot. Lock it into position
by tightening the thumb screw.