SINGER 611 User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selector: AK
Stitdi width lever; 3
Throat plate: General purpose or
Straight stitdi
Zipper foot
CORDED WELTING
Cable cord comes in a variety of sizes and when covered with a hrmly woven fabric makes a corded
welting that is an excellent seam finish.
This welting is prepared in advance and then stitched into the seam. Cut a true bias strip iV« indres
wide, plus three times the width of the cord of either self or contrasting fabric. Sew strips together on
the lengthwise grain to obtain desired length.
Set Selector. Adjust zipper foot to the left side of the needle. Encase the cord in the bias strip, raw
edges even. Lower pressar bar. Stitci close to the cord, using a stitch length slightly longer than for
seaming the weight of fabric being used. Do not crowd the stitching against ^he cord.
/6