SINGER 611 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section to remain
Section to be onened
Section to remain
>
However, if the section towards the
beginning of the seam is to remain and
the segment towards the end of the
seam is to be removed, either partly
or completely, the remaining section
must be locked nrst. For this purpose,
cut the seam at the desired place on
the top side and pull the loop out of
the fabric on the underside of same.
Then the desired segment of the seam
can be removed as stated above.
TO CHANGE FROM CHAIN STITCHING TO LOCK STITCHING
Cimnging to lock stitching requires only unthreading of the diain stitch thread guide (see page 25), repla
cing the bobbin and inserting the desired zigzag or straight stitch throat plate.
27