Threading the bobbin case – SINGER W173 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
11
THREADING THE BOBBIN CASE
step 1 (illustrated in Fig. 9). Hold bobbin case between thumb and forefinger of left hand,
so that the slot in the edge of the bobbin case is on top, take the bobbin between thumb
and forefinger of right hand so that the thread on top leads from left to right.
Step 2. Insert bobbin into bobbin case, pull the thread into the slot of the bobbin case as
shown in Fig. 10, and draw it under the tension spring and into the fork-shaped opening
of the spring as shown in Fig. 11.
SLOT
LOT
Fig. 9
Fig. 10
Fig. 11
Advertising