Attachment foot, The edgestitcher – SINGER W173 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\
27
ATTACHMENT FOOT
Fig. 34
In order to attach the binder, edgestitcher and the hem
mers, it is necessary to remove the presser foot and
replace it with the attachment foot Fig. 34.
Mount
binder,
edgestitcher
or
hemmers,
sliding
the
attachment
to
the
left
as
far
as
possible
and
tighten
screw.
The mounting slot enables you to sew as close to or as
far away from the edge as desired. Just move the at
tachment
to
the
correct
position
before
tightening
the
mounting screw.
THE EDGESTITCHER
The edgestitcher is used in mak
ing
lace
insertions,
edgings
and
pipings.
The
slots
serve
as
guides.
To
sew
lace
edging
to
fabric,
place
the
material
you
want on top in slot 1 and the
other piece in slot 4, Fig. 3©.
To trim with a wide piping, place
the fabric in slot 4, and the told
of the piping to the left in slot
3, for a narrow piping, place the fabric in slot 2 and the folded edge of the pi
right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
Fig. 35
Fig. 36
ping to the