The set of hemmers, Darning spring – SINGER W173 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
»
t
I
►
>
»
»
»
»
I
I
i
i
i
»
»
»
»
31
THE SET OF HEMMERS
Before
attaching
any
of
the
hemmers,
be
sure
bobbin
thread is pulled up. Then, with hemmer in place, hold
top
thread
loosely
and
turn
hand
wheel
one
full turn
toward you, making a loop under hemmer. 0rasp bob
bin thread with both hands and slip horizontally under
hemmer
toward
back.
Bobbin
thread
will
catch
loop
and carry upper thread to back of hemmer.
Fold material % inch for two inches along edge, hold at
each end of fold. Slip fold into guide and up over spoon
Fig. 44). Fold hem in material back of hemmer. Draw
forward to end of hem and fasten with point of needle.
Pull on threads gently as you start stitching.
DARNING SPRING
HOW TO ATTACH
Remove
presser
foot,
unthread
needle,
place
darner
spring on needle and slip hook up over needle clamp.
Fig. 44
Fig. 45