Adjusting pressure and feeding of fabric, Adjusting pressure and feed – SINGER W173 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
15
Fig. 17
Fig. 18 i
Fig. 15
Fig. 19
ADJUSTING PRESSURE AND FEEDING OF FABRIC
GENERAL SEWING
Usually for normal sewing the pressure bar cap or darner release,
22, Fig. 19, is at Its lowest position and the drop feed knob is
turned to “HI” position. Fig. 20.
SEWING THIN OR LIGHT WEIGHT FABRICS
When lighter pressure is required to sew satisfactorily on thin silk
or filmy material, the pressure cap should be about halfway down.
Release all the way by pressing the snap lock, (A, Fig. 21) and
then press cap (B) down again to halfway spot. Lower the feed
slightly by turning the black dot on the knob to ”LO” position.
Fig. 20
Advertising