Shisr – SINGER W1466 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
16
sHiSr
S -
iSSss:,Sf;!'A
E. Drop feed, set stitch width lock at 5, take 3 or 4 stitches, leave needle in fabric left of
stitches. Pivot fabric on needle to make next daisy petal. Continue until flower design is com
plete. Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to
work free hand when embroidering or monogram-
ming. (See Fig. 23). Release the pressure from
the foot by pressing down on the snap lock ring
on the darner. Push the drop feed button down
all the way.
Stretch the fabric in an embroidery hoop, and
place under the needle after removing the presser
foot. Set the stitch width at the size you prefer
and lower the presser bar lifter. Then operate the .
machine at a rather high speed while moving the
hoop slowly with both hands. Work carefully and be sure to keep fingers out of the path of
the needle.
Should you encounter skip stitches, the fabric is not stretched tight enough or a darning spring
is needed (see attachments available from your dealer illustrated in the back of this book.)
Fig. 23
^1
.-.1
c;
cl
CH