SINGER W1466 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THE BOBBIN CASE
Step 1 (illustrated in Fig. 6). Hold
bobbin case between thumb and fore
finger of left hand, so that the slot in
the edge of the bobbin case is on top.
Take the bobbin between thumb and
forefinger of right hand so that the
thread on top leads from left to right.
Step 2. Insert bobbin into bobbin case,
pull the thread into the slot of the bob
bin case as shown in Fig. 7, and draw
it under the tension spring and into the
fork-shaped opening of the spring as
shown in Fig. 8
Advertising