SINGER W1466 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
30.
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
■m
replace it with the attachment foot.
Mount binder, edgestitcher or
attachment to the left as far as
screw.
The mounting slot enables you
or as far away from the edge as desired,
attachment to the correct position before
mounting screw.
Fig. 44
hemmers sliding the
possible and tighten
to sew as close to
Just move the
tightening the
Fig. 44
EDGESTITCHER
The edgestitcher is used in mak
ing lace insertions, edgings and pip
ing. The slots serve as guides. To
sew lace edging to fabric, place the
material you want on top in slot. Fig.
45, and the other piece in slot 4.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
the piping to the left in slot 3, for a
narrow piping, place the fabric in slot 2 and the folded edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
Fig. 45
Fig, 46