Straight stitching, Straight stitching -12 – SINGER W1065 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11
STRAIGHT STITCHING
For straight sewing on fine fabric
or very soft material, it is advisable
to use the straight stitch presser foot
and
the
straight
stitch
needle
plate
which
are
included
in
your
accessory
,J box. Both have narrow needle slots.
•
Changing the Foot and Plate. To
' ■ « change presser foot i 22 Fig. 1 ' loosen thumb screw and
Fig. 15
remove zigzag foot. Replace with hinged straight foot
and tighten screw securely. Fig. 16
To change needle plate = 19 Fig. 1 > remove screw and lift off with cover plate attached.
Hold needle plate with left hand and cover plate with the right. i Fig. 15 >
Press upper corner of cover plate (right side upl down slightly and slip jnn from groove in
needle plate. Avoid using too much pressure. When the pm is released the two plates will
separate.
Attach cover plate to straight stitch plate by reversing the above procedure.
Slip pm on lower side of cover plate into groove on needle plate. Insert tongue into square
opening and slide upper pm into position. Put plates on machine and fasten securely with needle
plate screw.