SINGER W1065 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
41
Trouble
i Probable Cause
Correction
Upper Thread
Breaking
Improperly threaded
Refer to threading instructions see page No. 8
and rethread machine
Too much tension
Loosen tension on upper thread by turning
thread tension knob to lower number
Starting with take-up
i in incorrect position
Always start sewing with take-up lever in
highest position
Improper setting of
needle
Refer to needle setting instruction see page No. 6
^ Bent or eye of needle :
too sharp
Try a new needle
Bent or blunt needle
Discard all blunt or bent needles and replace
with new
Material
Puckering
Tensions too tight
See tension adjustment page No. 13 and 14
Dull needle !
Change needle
Stitch length too long
Reduce stitch length