SINGER W1065 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THREADING THE BOBBIN CASE
Step 1 i illustrated in Fig. 7 i. Hold bobbin
case between thumb and forefinger of left hand,
so that the slot m the edge of the bobbin case
IS on top. Take the bobbin between thumb and
forefinger of right hand so that the thread on
top
leads
from
left
to
right.
Step
2.
Insert
bobbin into bobbin case, pull the thread into the
slot of the bobbin case as shown in Fig. 8, and
draw it under the tension spring and into the fork
shaped opening of the spring as shown in Fig. 9.
Fig. 6
i
Fig. 7
Fig. 8
Fig. 9
Advertising