Removing the work, Setting needle position, Setting needle position -17 – SINGER W1065 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
16
REMOVING THE WORK
Be sure to stop the machine when the thread take-up lever and needle bar l°^^*ed at the
hiahest position Now raise the presser foot and draw the fabric back and to the e , g.
is 27, and pass ,ha threads over the thread cutter. Pull dowrr sl.ghtly
holding
thread rn both
hands, so as not to bend the, needle. Leave the ends of thread under the presser foot.
Fig. 26
Fig. 27
SETTING NEEDLE POSITION
The needle bar should be at its highest point when adjusting needle position to avoid tearing
levar to right, center or left for corresponding needle positions.
Advertising