Flatlock, Double-action stitch, Puntado overlock triple - puntada de tricot – SINGER W5839 User Manual

Page 22: Flatlock - double-action stitch

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Flatlock -

Double-Action stitch

Flatlock or Double-Action stitch 5

:

-

is suitable for sewing overlapped seams
and decorative hems.

Puntado overlock triple

- Puntada de tricot

Puntada overlook triple o puntada de tricot

I t , es una costura que se emplea

para costuras montadas y bastillas.

You can produce a decorative hem by fold­

ing a single hem to the wrong side and
sewing the flatlock from the right side. Trim
excess hem to stitching from the wrong side.

Para obtener una bastilla decorativa, doble
la tela sobre su revés, formando así una

bastilla, y cosa con overlock triple sobre el
lado derecho.

To sew an overlapped seam, lap one piece

of fabric 1 cm over the other piece and sew
flatlock stitch over the fabric edge on the

right side. Trim from the wrong side or sew
another seam from the right side.

Para confeccionar una costura montada,
coloque una parte del género sobre la otra
y cosa con overlock triple sobre el lado de­

recho del borde del género y recorte el
aumento de la costura limpiamente en el

revés.

When gathering with narrow, flat elastic or

elastic cord, stitch it with the double-action

stitch. To be sure the elastic does not get
stitched in by mistake but can run freely un­
der the stitching, use presser foot A or B and

slip narrow elastic between the toes of the
foot.

24

AI fruncir con cordoncillo estrecho, redorado

o llano, utilice la puntada de tricot. Asegúre­
se de que el cordoncillo se desliza libre­

mente, sin estar cogido por las puntadas.
Utilice el prénsatelas A o B.

Advertising
This manual is related to the following products: