Inserting a zipper, Inserting a zip – SINGER 6610 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a zipper
We recommend using the Zip Foot to form
an even line of stitching close to the zipper.
Recommended settings
Stitch Selection;
Straight Stitch no. 2
Needle Position:
Stitch Width:
p j l l i i
Stitch Length:'
Foot:
Zipper (E)
Needle Plate:
General Purpose (A)
When the zipper teeth are to the left of the
needle.
• Slide the adjusting block, (1) which slides
on the pin, across to the right.
• Snap on the foot to the left side of the pin.
(See changing snap-on presser feet.)
• Check the position of the foot by lowering
the needle Into the notch on the side of
the foot, to ensure that it clears the foot.
* •
When the zipper teeth are to the right of the
needle.
• Slide the adjusting block, (1) across to the
left.
Snap-on the foot to the right side of the
pin. (See changing snap-on presser feet.)
Check the position of the foot by lowering
the needle Into the notch on the side of
the foot, to ensure that it clears the foot
19