Straight stretch stitch no. 3, Ric-rac stitch no. 5, I i i i – SINGER 6610 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
J
30
straight stretch stitch
no. 3
When you use the straight stretch stitch for
stress seam or to seam knitted, stretch and
elasticated fabric, both stretch and strength
are built into the seam as it is being sewn.
• Place garment right side up, under presser
foot.
Required settings
Stitch Selection:
Straight Stretch no. 3
Needle Position;
Stitch Width:
i i i i
Stitch Length:
At dot (•)
Foot:
Special Purpose (J)
Needle Plate:
General Purpose (A)
• Lower the foot and start machine, holding
the thread ends as the first few stitches
are made.
• Guide the fabric lightly as ypu sew, letting
the machine make the backward and
forward stitches that give stretch to the
seam.
• Press seam after stitching.
Ric-rac stitch no. 5
This Is a heavy-duty, stretch stitch that can
also be used for topstitching.
• Sew seams In usual manner and press.
•
For topstitching hard-to-reach areas,
convert machine to free arm sewing.
Required settings
Stitch Selection:
RIc-Rac Stitch no. 5
Needle Position:
UIU
Stitch Width:
:iiH
Stitch Length;
At dot (•)
Foot:
Special Purpose (J)
Needle Plate:
General Purpose (A)
• Place garment right side up, under foot.
• Slowly topstitch desired areas.
• Pull threads to wrong side of fabric; tie and
trim.