Stitch width selector, Needle position selector, Balancing flexi stitches – SINGER 6610 User Manual
Page 34: Needle position selector stitch width selector, I i i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I I I
r
stitch width selector
To produce a Flexi-stitch pattern, the stitch
width selector must be moved from straight
stitch setting to any of its other four positions.
The far right pattern will produce the widest
stitch.
Needle position selector
Flexi-stitch patterns^may be sewn jn either
left ( ^ ). centre ( i ) or right ( ^ ) posi
tions.
Centre
needle
position
is
recommended.
Balancing flexi stitches
You may need to adjust the Flexi-stitch
Balance selector when using a flexi-stitch
pattern in order to achieve the correct pattern
appearance.
Before you move the stitch balance dial from
its neutral position, make a test sample using
two layers of scrap fabric. If adjustment is
required stitch slowly and move the selector
as you sew.
Move selector to the left to bring stitches
of the pattern together.
•
• Move selector to the right to separate
stitches of pattern.
29