Zig-zag stitching, I i i, Stitch pattern selector – SINGER 6610 User Manual
Page 25: Needle position selector, Stitch width selector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
N
i I I
J
“>v
4. ZIG-ZAG
STITCHING
stitch pattern selector
Raise the needle to its highest position.
• Set the stitch width selector to the straight
position ( { ). (This allows the pattern
selector to be moved easily).
• Slide the pattern selector to the centre of
the desired pattern group.
Needle position selector
Before moving selector, make sure needle
is fully raised.
e Most of your zig-zag stitching will be done
with the needle in the centre ( ’ ) position.
Left(
9
) and right ( ^ ) settings are used
for special stitch placement.
stitch width selector
Before moving selector, make sure needle
is fully raised.
• To produce any of the zig-zag stitches, the
stitch width selector Is moved from Its
straight position ( j ) to any of its other
four positions. The further you move the
selector level toward the right, the wider
your stitch will be.
V.
20