Changing the light bulb – SINGER 6610 User Manual

Page 44

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Changing the light bulb

Caution: Before changing light bulb, make

sure you have removed plug from socket

outlet and remove face plate which covers
the light bulb. Be sure to replace the face

plate which covers the light bulb before
operating the machine.

This machine is designed to use a 15-watt
maximum light bulb with a bayonet fitting.

• Loosen and remove screw (1) located on

face plate.

• Remove face plate |>y grasping It around

the bottom edge and pulling toward the left,
then down and away from machine.

• Do not attempt to unscrew light bulb.

• Push bulb up into socket and turn in the

direction of arrows to unlock bulb pin.

• Pull buib down and out of socket.

Push new bulb up into socket and turn in

the direction of arrows until pins lock into

position.

Making sure the presser foot lifter is up,

replace the face plate by guiding front top
corner under and behind lowest front

corner

of top cover. Push bottom of face

plate up and back until it is aligned with

top cover.

Insert screw and tighten.

39

Advertising