Nortel Networks T7316 - Manual (Page 126)

126 Chapter 11 System features
P0937240 03.1
Pause
The Pause feature enters a 1.5-second delay in a dialing sequence on an external line. The use of
this feature is often required for signaling remote devices, such as answering machines, or when
reaching through to PBX features or host systems.
You can program more than one pause in an external autodial or speed dial sequence.
The Pause symbol ( › ) uses one of the 24 spaces in a dialing sequence.
For pulse dialing, • inserts a 1.5-second pause into the dialing sequence.
Long Tones
The Long Tones feature allows you to control the length of a tone to signal devices such as fax or
answering machines which require tones longer than the standard 120 milliseconds.
1 While on a call, press ≤°‚°.
2 Press the dial pad buttons to produce the appropriate tones. Each tone sounds while you hold
down the button.
You can use Long tones on any call except a conference call. You can use internal lines of the
system to activate a device connected to an ATA2 or an ASM in another area of your office, or
external lines to access devices outside the system.
Run/Stop
Run/Stop inserts a break point into a sequence of dialed numbers or characters used for automatic
dialing. This can be necessary when you are connecting to a PBX or similar host system.
For example: you can call a company with an automated attendant that instructs you to dial the
internal number you need. You can program the company number, a Run/Stop, then the internal
number on one external autodial button.
To use:
1 Press the autodial button one time to dial the company number.
2 When you hear the automated attendant, press the autodial button again to dial the internal
number.
The Run/Stop symbol ( fl ) uses one of the 24 spaces in an autodial or speed dial sequence.
You can include up to three Run/Stop commands in a dialing string. The system ignores a fourth
Run/Stop, and any digits or commands that follow three Run/Stop commands in a programmed
dialing sequence.
At the appropriate time, press any dial pad button. Hold each button
down for as long as necessary. Press ≤ or ≥ to cancel Long Tones. Long Tones: