Nortel Networks T7316 - Manual (Page 131)

Chapter 11 System features 131
Telephone Features Programming Guide
Call Forward
Call Forward allows you to forward incoming calls to an external telephone number. Ask your
service provider for the appropriate Call Forward feature code.
1 Select an ISDN line by selecting a line button, a line pool, or the Handsfree button, or by
lifting the handset (if an ISDN line is your prime line).
2 Enter the Call Forward feature code. Listen for three tones followed by dial tone.
3 Enter the number of the telephone where you want to forward your calls. If the call is
answered, remain on the line for at least five seconds to activate the Call Forward feature.
Cancel Call Forward
1 Select an ISDN line by selecting a line button, a line pool, or the Handsfree button, or by
lifting the handset (if an ISDN line is your prime line).
2 Enter the feature code to cancel Call Forward. Listen for a series of tones.
3 Press ®.
Call the number where your calls are forwarded
1 Select an ISDN line by selecting a line button, a line pool, or the Handsfree button, or by
lifting the handset (if an ISDN line is your prime line).
2 Enter the feature code.
Automatic Call Back
If you call a number and it is busy, enter the appropriate feature code assigned by your service
provider to receive ringing notification when the line becomes available. The Automatic Call Back
ring type is different from your normal telephone ring type.
Automatic Recall
Automatic Recall allows you to automatically dial the number of the last call you received. You
cannot see the number on the display if the information is not available from your service provider,
or when you do not have Caller ID in your ISDN service. Ask your service provider for the
appropriate feature code.