Nortel Networks T7316 - Manual (Page 54)

54 Chapter 3 Make a call
P0937240 03.1
Leave a conference call
You can remove yourself from a conference, and connect the other two callers.
Enter the Transfer feature code ≤‡‚.
When you remove yourself from a conference using the Transfer feature, and both calls are from
outside your system, one of the calls must have come to you on a disconnect supervised line, or the
call disconnects.
Conference call prompts
These are some of the prompts you may receive when attempting to make a conference call:
You are trying to add a fourth party to your conference call, or to join
two conferences together. Release one call from the conference before
adding another, or keep the two conferences separate.
You have tried to make a conference call, but your system is handling
the maximum number of conference calls.
You are on a conference with the two lines or telephones shown. You
can drop out of the conference and leave the other two parties connected
(Unsupervised Conference) by pressing TRANSFR or entering the
Transfer feature code.
You have activated the Conference feature with one call active and
another on hold. Press the held line to bring that person into the
conference.
For other displays, see Appendix B, “Common display prompts and error messages,” on page
167 .
3 parties only
Conference busy
Line001 221
TRANSFR
Press held line