Cisco 15327 - Manual (Page 17)

Contents
xvii
Ethernet Card Software Feature and Configuration Guide, R7.2
Role of SONET/SDH Circuits 26-2
RPR-IEEE Framing Process 26-3
CTM and RPR-IEEE 26-6
Configuring RPR-IEEE Characteristics 26-6
Configuring the Attribute Discovery Timer 26-7
Configuring the Reporting of SONET Alarms 26-7
Configuring BER Threshold Values 26-8
Configuring RPR-IEEE Protection 26-8
Configuring the Hold-off Timer 26-9
Configuring Jumbo Frames 26-10
Configuring Forced or Manual Switching 26-11
Configuring Protection Timers 26-12
Configuring the Wait-to-Restore Timer 26-13
Configuring a Span Shutdown 26-14
Configuring Keepalive Events 26-14
Configuring Triggers for CRC Errors 26-15
Configuring QoS on RPR-IEEE 26-17
Class A 26-17
ClassB 26-17
ClassC 26-18
MQC -IEEE RPR CLI Characteristics 26-18
Configuring Traffic Rates for Transmission 26-18
Configuring Fairness Weights 26-19
Configuring RPR-IEEE Service Classes Using the Modular QoS CLI 26-19
Configuration Example for RPR-IEEE QoS 26-21
Configuration Example Using MQC to Configure Simple RPR-IEEE QoS 26-21
Configuration Example Using MQC to Configure Complex RPR-IEEE QoS 26-21
Verifying and Monitoring RPR-IEEE 26-22
Configuring RPR-IEEE End-to-End 26-30
Provisioning Card Mode 26-31
Connecting the ML-Series Cards with Point-to-Point STS/STM Circuits 26-31
Guidelines for Connecting the ML-Series Cards with Point-to-Point STS/STM Circuits 26-31
Example of Connecting the ML-Series Cards with Point-to-Point STS/STM Circuits 26-32
Creating the RPR-IEEE Interface and Bridge Group 26-32
Understanding the RPR-IEEE Interface 26-33
Understanding the RPR-IEEE Bridge Group 26-33
Configuration Examples for Cisco IOS CLI Portion of End-to-End RPR-IEEE 26-35
Verifying RPR-IEEE End-to-End Ethernet Connectivity 26-37
Understanding Redundant Interconnect 26-37