Cisco 15327 User Manual
Cisco Hardware
Advertising
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408
526-4000
800 553-NETS (6387)
Fax: 408
526-4100
Ethernet Card Software Feature and
Configuration Guide
For the Cisco ONS 15454, Cisco ONS 15454 SDH, and Cisco ONS 15327
Cisco IOS Release 12.2 (29a) sv
CTC and Documentation Release 7.2
Last Updated: August 2012
Text Part Number: 78-17736-02
Advertising
Table of contents
Document Outline
- Ethernet Card Software Feature and Configuration Guide
- About this Guide
- ML-Series Card Overview
- CTC Operations
- Displaying ML-Series POS And Ethernet Statistics on CTC
- Displaying ML-Series Ethernet Ports Provisioning Information on CTC
- Displaying ML-Series POS Ports Provisioning Information on CTC
- Provisioning Card Mode
- Managing SONET/SDH Alarms
- Displaying the FPGA Information
- Provisioning SONET/SDH Circuits
- J1 Path Trace
- Initial Configuration
- Configuring Interfaces
- General Interface Guidelines
- Basic Interface Configuration
- Basic Fast Ethernet, Gigabit Ethernet, and POS Interface Configuration
- Configuring the Fast Ethernet Interfaces for the ML100T-12
- Configuring the Fast Ethernet Interfaces for the ML100X-8
- Configuring the Gigabit Ethernet Interface for the ML1000-2
- Configuring Gigabit Ethernet Remote Failure Indication (RFI)
- Monitoring and Verifying Gigabit Ethernet Remote Failure Indication (RFI)
- Configuring the POS Interfaces (ML100T-12, ML100X-8 and ML1000-2)
- CRC Threshold Configuration
- Monitoring Operations on the Fast Ethernet and Gigabit Ethernet Interfaces
- Configuring POS
- Configuring Bridges
- Configuring STP and RSTP
- STP Features
- STP Overview
- Supported STP Instances
- Bridge Protocol Data Units
- Election of the Root Switch
- Bridge ID, Switch Priority, and Extended System ID
- Spanning-Tree Timers
- Creating the Spanning-Tree Topology
- Spanning-Tree Interface States
- Spanning-Tree Address Management
- STP and IEEE 802.1Q Trunks
- Spanning Tree and Redundant Connectivity
- Accelerated Aging to Retain Connectivity
- RSTP
- Interoperability with IEEE 802.1D STP
- Configuring STP and RSTP Features
- Default STP and RSTP Configuration
- Disabling STP and RSTP
- Configuring the Root Switch
- Configuring the Port Priority
- Configuring the Path Cost
- Configuring the Switch Priority of a Bridge Group
- Configuring the Hello Time
- Configuring the Forwarding-Delay Time for a Bridge Group
- Configuring the Maximum-Aging Time for a Bridge Group
- Verifying and Monitoring STP and RSTP Status
- STP Features
- Configuring VLANs
- Configuring IEEE 802.1Q Tunneling and Layer 2 Protocol Tunneling
- Configuring Link Aggregation
- Configuring Networking Protocols
- Basic IP Routing Protocol Configuration
- Configuring IP Routing
- Configuring Static Routes
- Monitoring Static Routes
- Monitoring and Maintaining the IP Network
- Understanding IP Multicast Routing
- Configuring IRB
- Configuring VRF Lite
- Configuring Quality of Service
- Understanding QoS
- ML-Series QoS
- QoS on Cisco Proprietary RPR
- Configuring QoS
- Monitoring and Verifying QoS Configuration
- QoS Configuration Examples
- Understanding Multicast QoS and Priority Multicast Queuing
- Configuring Multicast Priority Queuing QoS
- QoS not Configured on Egress
- ML-Series Egress Bandwidth Example
- Understanding CoS-Based Packet Statistics
- Configuring CoS-Based Packet Statistics
- Understanding IP SLA
- Configuring the Switching Database Manager
- Configuring Access Control Lists
- Configuring Cisco Proprietary Resilient Packet Ring
- Understanding Cisco Proprietary RPR
- Configuring Cisco Proprietary RPR
- Connecting the ML-Series Cards with Point-to-Point STS/STM Circuits
- Configuring CTC Circuits for Cisco Proprietary RPR
- Configuring Cisco Proprietary RPR Characteristics and the SPR Interface on the ML-Series Card
- Assigning the ML-Series Card POS Ports to the SPR Interface
- Creating the Bridge Group and Assigning the Ethernet and SPR Interfaces
- Cisco Proprietary RPR Cisco IOS Configuration Example
- Verifying Ethernet Connectivity Between Cisco Proprietary RPR Ethernet Access Ports
- CRC threshold configuration and detection
- Monitoring and Verifying Cisco Proprietary RPR
- Add an ML-Series Card into a Cisco Proprietary RPR
- Delete an ML-Series Card from a Cisco Proprietary RPR
- Understanding Cisco Proprietary RPR Link Fault Propagation
- Configuring LFP
- Cisco Proprietary RPR Keep Alive
- Configuring Cisco Proprietary RPR Keep Alive
- Cisco Proprietary RPR Shortest Path
- Configuring Shortest Path and Topology Discovery
- Understanding Redundant Interconnect
- Configuring Ethernet over MPLS
- Configuring Security for the ML-Series Card
- Understanding Security
- Disabling the Console Port on the ML-Series Card
- Secure Login on the ML-Series Card
- Secure Shell on the ML-Series Card
- RADIUS on the ML-Series Card
- RADIUS Relay Mode
- RADIUS Stand Alone Mode
- Understanding RADIUS
- Configuring RADIUS
- Default RADIUS Configuration
- Identifying the RADIUS Server Host
- Configuring AAA Login Authentication
- Defining AAA Server Groups
- Configuring RADIUS Authorization for User Privileged Access and Network Services
- Starting RADIUS Accounting
- Configuring a nas-ip-address in the RADIUS Packet
- Configuring Settings for All RADIUS Servers
- Configuring the ML-Series Card to Use Vendor-Specific RADIUS Attributes
- Configuring the ML-Series Card for Vendor-Proprietary RADIUS Server Communication
- Displaying the RADIUS Configuration
- POS on ONS Ethernet Cards
- POS Overview
- POS Interoperability
- POS Encapsulation Types
- POS Framing Modes
- POS Characteristics of Specific ONS Ethernet Cards
- ONS 15327 E-10/100-4 Framing and Encapsulation Options
- ONS 15454 and ONS 15454 SDH E-Series Framing and Encapsulation Options
- G-Series Encapsulation and Framing
- ONS 15454, ONS 15454 SDH, ONS 15310-CL, and and ONS 15310-MA CE-Series Cards Encapsulation and Framing
- ONS 15310 ML-100T-8 Encapsulation and Framing
- ONS 15454 and ONS 15454 SDH ML-Series Protocol Encapsulation and Framing
- Ethernet Clocking Versus SONET/SDH Clocking
- Configuring RMON
- Configuring SNMP
- E-Series and G-Series Ethernet Operation
- G-Series Application
- G-Series Circuit Configurations
- G-Series Gigabit Ethernet Transponder Mode
- E-Series Application
- E-Series Circuit Configurations
- Remote Monitoring Specification Alarm Thresholds
- CE-100T-8 Ethernet Operation
- CE-1000-4 Ethernet Operation
- Configuring IEEE 802.17b Resilient Packet Ring
- Understanding RPR-IEEE
- Configuring RPR-IEEE Characteristics
- Configuring RPR-IEEE Protection
- Configuring QoS on RPR-IEEE
- Configuration Example for RPR-IEEE QoS
- Verifying and Monitoring RPR-IEEE
- Configuring RPR-IEEE End-to-End
- Understanding Redundant Interconnect
- Command Reference
- [no] bridge bridge-group-number protocol {drpri-rstp | ieee | rstp}
- [no] clock auto
- interface spr 1
- [no] ip radius nas-ip-address {hostname | ip-address}
- microcode fail system-reload
- [no] pos pdi holdoff time
- [no] pos report alarm
- [no] pos trigger defects condition
- [no] pos scramble-spe
- rpr-ieee atd-timer value
- rpr-ieee fairness weight value
- [no] rpr-ieee ri foreign
- rpr-ieee keepalive-timer interval [east | west]
- [no] rpr-ieee protection pref jumbo
- [no] rpr-ieee protection request forced-switch {east | west}
- [no] rpr-ieee protection request manual-switch {east | west}
- rpr-ieee protection sonet holdoff-timer interval {east | west}
- rpr-ieee protection timer fast rate {east | west}
- rpr-ieee protection timer slow rate {east | west}
- rpr-ieee protection wtr-timer {interval | never}
- rpr-ieee flag c2 value
- rpr-ieee pdi holdoff time interval
- [no] rpr-ieee report alarm
- [no] rpr-ieee ri {primary | secondary} peer peer-MAC-address
- [no] rpr-ieee ri {primary | secondary} delay interval
- [no] rpr-ieee shutdown {east | west}
- rpr-ieee tx-traffic rate-limit high rate [east | west]
- rpr-ieee tx-traffic rate-limit medium rate [east | west]
- rpr-ieee tx-traffic rate-limit reserved rate [east | west]
- [no] rpr-ieee tx-traffic strict
- show controller pos interface-number [detail]
- show controller rpr-ieee interface-number [detail]
- show interface pos interface-number
- show interface rpr-ieee interface-number
- show ons alarm
- show ons alarm defect eqpt
- show ons alarm defect port
- show ons alarm defect pos interface-number
- show ons alarm defect rpr [interface-number]
- show ons alarm failure eqpt
- show ons alarm failure port
- show ons alarm failure pos interface-number
- show ons alarm failure rpr [interface-number]
- show rpr-ieee counters
- show rpr-ieee failure rpr-ieee interface-number
- show rpr-ieee fairness detail
- show rpr-ieee fairness history
- show rpr-ieee protection
- show rpr-ieee rate detail
- show rpr-ieee topology detail
- [no] shutdown
- spr-intf-id shared-packet-ring-number
- [no] spr load-balance {auto | port-based}
- spr station-id station-id-number
- spr wrap {immediate | delayed}
- [no] xconnect [destination] [vc-id] [encapsulation mpls]
- Unsupported CLI Commands
- Unsupported Privileged Exec Commands
- Unsupported Global Configuration Commands
- Unsupported POS Interface Configuration Commands
- Unsupported POS Interface Configuration Commands (Cisco Proprietary RPR Virtual Interface)
- Unsupported IEEE 802.17 RPR Interface Configuration Commands
- Unsupported FastEthernet or GigabitEthernet Interface Configuration Commands
- Unsupported Port-Channel Interface Configuration Commands
- Unsupported BVI Interface Configuration Commands
- Using Technical Support
- Index