Cisco 15327 User Manual

Page 455

Advertising
background image

26-23

Ethernet Card Software Feature and Configuration Guide, R7.2

Chapter 26 Configuring IEEE 802.17b Resilient Packet Ring

Verifying and Monitoring RPR-IEEE

The show interface rpr-ieee interface-number command (

Example 26-3

) displays the following

for an interface:

Primary or secondary status (if RI is activated)

Active or standby mode (if RI is activated)

Up or down (pass-through mode) status

Monitoring status and by extension, general protection status

The show interface rpr-ieee fairness detail command (

Example 26-4

) displays the following for

an interface:

Total bandwidth

Traffic class configured transmission rates

Fairness weight settings for the interface

Instances of congestion

The show rpr-ieee protection command (

Example 26-5

) displays the following for an interface:

Station and neighbor interface MAC addresses

Protection timer settings

Ring protection status

Span failures

The show rpr-ieee topology detail command (

Example 26-6

) displays the following for the ring:

Station names and neighbor MAC addresses of all stations on the ring

Traffic class configured transmission rates for all stations on the ring

Fairness weight settings for all stations on the ring

Jumbo frame status (on or off) for all stations on the ring

ATD information for all stations on the ring

Protection mode for all nodes on the ring

Secondary MAC addresses for all stations on the ring

Example 26-3 show interface rpr-ieee 0 Output

router# show interface rpr-ieee 0

RPR-IEEE0 is up, line protocol is up

Hardware is RPR-IEEE Channelized SONET, address is 000e.8312.bcf0 (bia 000e.8312.bcf0)

MTU 1500 bytes, BW 145152 Kbit, DLY 100 usec,

reliability 255/255, txload 105/255, rxload 99/255

Encapsulation: RPR-IEEE,

West Span: loopback not set

East Span: loopback not set

MAC passthrough not set

RI: primary,active peer mac 000e.8312.b870

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

West Span: 5 minutes output rate 57872638 bits/sec, 25307 packets/sec

Advertising