Cisco 15327 - Manual (Page 184)

11-26
Ethernet Card Software Feature and Configuration Guide, R7.2
Chapter 11 Configuring Networking Protocols
Configure EIGRP Route Authentication
Monitoring and Maintaining EIGRP
You can delete neighbors from the neighbor table. You can also display various EIGRP routing statistics.
Table 11-5 lists the privileged EXEC commands for deleting neighbors and displaying statistics. For
explanations of fields in the resulting display, refer to the Cisco IOS IP and IP Routing Command
Reference publication.
Example 11-10 shows the output of the show ip eigrp interface privileged EXEC command.
Example 11-11 shows the output of the show ip eigrp neighbors privileged EXEC command.
Example 11-12 shows the output of the show ip eigrp topology privileged EXEC command.
Example 11-13 shows the output of the show ip eigrp traffic privileged EXEC command.
Example 11-10 show ip eigrp interface Privileged EXEC Command Output
Router# show ip eigrp interface
IP-EIGRP interfaces for process 1
Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
PO0 1 0/0 20 0/10 50 0
Fa0 0 0/0 0 0/10 0 0
Example 11-11 show ip eigrp neighbors Privileged EXEC Command Output
Router# show ip eigrp neighbors
IP-EIGRP neighbors for process 1
H Address Interface Hold Uptime SRTT RTO Q Seq Type
(sec) (ms) Cnt Num
0 192.168.2.1 PO0 13 00:08:15 20 200 0 2
Example 11-12 show ip eigrp topology Privileged EXEC Command Output
Router# show ip eigrp topology
IP-EIGRP Topology Table for AS(1)/ID(192.168.3.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
Table 11-5 IP EIGRP Clear and Show Commands
Command Purpose
Router# clear ip eigrp neighbors
{ ip-address | interface}
Deletes neighbors from the neighbor table.
Router# show ip eigrp interface
[ interface] [as-number]
Displays information about interfaces configured for
EIGRP.
Router# show ip eigrp neighbors
[ type-number]
Displays EIGRP discovered neighbors.
Router# show ip eigrp topology
{ autonomous-system-number |
[ ip-address] mask}
Displays the EIGRP topology table for a given process.
Router# show ip eigrp traffic
[ autonomous-system-number]
Displays the number of packets sent and received for all
or a specified EIGRP process.