Datalogic Scanning Compact 2D Reader Matrix-2000 - Manual (Page 18)

Matrix-2000™ Reference Manual
1
To cancel the Positioning function, press and hold the keypad button at any time during the
procedure: the F1 LED will stop blinking and Matrix-2000™ will emit a long low pitched beep.
yellow
Positioning (F1)
Figure 8 – Positioning Function
Restore Default (Optional)
At any time you can use the Restore Default procedure to return the reader to the factory
default settings.
1. Enter the Restore Default function (F3) by pressing and holding the push button until both
the F1 and F2 LEDs are on: Matrix-2000™ also beeps three times.
2. Release the button to perform the Restore Default function.
= F1 yellow +
F2 green
Restore Default (F3)
Figure 9 – Restore Default Function
8