Datalogic Scanning Compact 2D Reader Matrix-2000 - Manual (Page 24)

Matrix-2000™ Reference Manual
2
2.2 DESCRIPTION
Some of the main features of this reader are given below:
• Decoding of most popular linear and stacked barcodes, 2D code symbologies and postal
codes
• Omni-directional reading
• Direct or 90° reading Window
• Quick installation without PC by using Autolearning button and F1, F2 LEDs
• Image Windowing function
• Frame rate up to 60 frames/sec (3600 frames/min)
• Up to 200 readable codes in the same reading phase
• Calibration Tool to verify exact code positioning in the Field of View and to maximize the
reading performance
• Ethernet interface (Matrix-21XX only) with TCP/IP socket for reader parameter
configuration, data and image transfer, HTTP server, FTP and mail client, etc.
• Windows-based VisiSet™ software to configure the reader parameter via PC serial or
Ethernet interface
• Code quality assessment according to ISO/IEC 16022, ISO/IEC 18004, ISO/IEC 15415,
ISO/IEC 15416 and AS9132 and AIM DPM standards.
• Different operating modes to suit various application requirements
• User-defined database of Image Acquisition Settings (parameter sets)
• Match Code option with a user-defined match code database
• Diagnostic software tools
• 2 serial communication interfaces
• General purpose optocoupled I/Os
• Supply voltage ranges from 10 to 30 Vdc
The reader is contained in a magnesium alloy housing; the mechanical dimensions are 121 x
73 x 57 mm and it weighs about 380 g.
The protection class of the enclosure is IP64 for all 20XX models; therefore the reader is
particularly suitable for industrial environments where protection against harsh external
conditions is required.
Electrical connection of Power, Host interfaces and I/O signals is provided through a 25-pin
connector (see Figure A, 9). In addition there is a 9-pin Auxiliary interface connector for
reader configuration (see Figure A, 10). A standard Ethernet RJ45 connector is present on
Matrix-21XX models (see Figure A, 11).
14