Desa EFS33NR - Manual (Page 17)

www.desatech.com 107172-01K 17
1. Place front log on top of the grate. Make sure
the notches in the bottom of the log fit over
the grate prongs (see Figure 24). Push back
of log flush with metal grate bar.
2. Rest middle log behind metal posts on front
burner. Make sure the grooves in the bottom of
the log fit over the grate. Bring the log forward
next to the metal posts (see Figure 25).
3. Slide the grooves in the back of the rear log
against the rear grate prongs. Make sure the
peg on the log is on top (see Figure 26).
4. Place the crossover log on the rear log and the
middle log. Make sure the peg on the rear log
is in the hole in the bottom of the crossover
log. The crossover log should fit in the cutout
of the middle log (see Figure 27).
5. Install fireplace screen by slipping notches
of fireplace screen over screws on front of
fireplace (see Figure 28).
WARNING: You must operate
this fireplace with the fireplace
screen in place. Make sure fire-
place screen is in place before
running fireplace.
INSTALLATION
Continued
Figure 24 - Installing Front Log
Figure 26 - Installing Rear Log
Figure 25 - Installing Middle Log
Middle Log
Rear Log
Peg
Grate Prong
Rear
Burner
Groove in
Back of Log
Groove in
Back of Log
Grate
Prongs
Metal Grate Bar
Front Log
Notch
Metal Post
Metal Post
Groove
Groove
Grate
Grate
Prong
Figure 27 - Installing Crossover Log
Crossover Log
Hole
Peg Cutout
Figure 28 - Installing Fireplace Screen
Notches
Screws for
Mounting Screen