Desa EFS33NR - Manual (Page 18)

www.desatech.com 107172-01K 18
INSTALLATION
Continued
INSTALLING LOGS (MODELS
EFS33NRA, EFS33PRA,
VSGF33NRA AND VSGF33PRA)
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
CAUTION: Do not remove
the data plates attached to the
heater base assembly. The data
plates contain important safety
and warranty information.
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use logs
supplied with heater.
1. Place front log on top of the grate. Make sure
the notches in the bottom of the log fit over
the grate prongs (see Figure 29). Push back
of logs flush with metal grate bars.
2. Rest middle log behind metal posts on grate as-
sembly. Make sure the grooves in the bottom of
the log fit over the grate. Bring the log forward
next to the metal posts (see Figure 30).
3. Slide the grooves in the back of the rear log
against the rear grate prongs. Make sure the
log fits securely over the prongs (see Figure
31). Make sure log is completely vertical and
not leaning in toward burner where the flame
will touch the log.
4. Install fireplace screen by slipping notches
of fireplace screen over screws on front of
fireplace (see Figure 28, page 17).
WARNING: You must operate
this fireplace with the fireplace
screen in place. Make sure fire-
place screen is in place before
running fireplace.
Figure 29 - Installing Front Log
Figure 31 - Installing Rear Log
Figure 30 - Installing Middle Log
Front Log
Grate
Prongs
Metal Grate Bars
Notch
Middle Log
Metal Post
Grate
Groove
Groove
Rear Log
Grate
Prong
Grate Prong
Groove in
Back of Log Groove in
Back of Log