3xLOGIC VIGIL Client - Manual (Page 13)

3xLOGIC’s
Sequence
Opens the Sequence window which turns on/off the camera sequencing on
connected analog monitors.
Server.
Update
Uploads and applies an update file on the server. Select the .VGL update file and the update
process will begin. Warning
Hardware
Opens the Hardware Information window which provides some basic information about the Capture
Card installed in the VIGIL
Camera information is displayed in the main portion of the
window. Three status icons are used to show the status of
each camera:
Along with the status icons, camera settings are also
displayed. The camera recording frame rate, the recording
resolution, recording mode and compression quality are
listed.
At the bottom of the window, DVR information such as running time, number of Client Connections, current
CPU and Memory usage and Oldest / Newest Footage Dates are displayed.
System running
since
Shows the time when the
CPU Shows the CPU usage on the DVR.
Connections Shows the amount of client connections to the DVR.
Mem The total memory usage on the DVR.
Oldest Footage/
Newest Footage
Shows the date and time of the oldest/newest footage stored on the DVR.
3xLOGIC’s VIGIL Client - Users Guide Page 13
Doc# 12031914
window which turns on/off the camera sequencing on
connected analog monitors. Note: The sequences must be configured on the
Uploads and applies an update file on the server. Select the .VGL update file and the update
Warning: This action will restart the server and take it temporarily offline.
Opens the Hardware Information window which provides some basic information about the Capture
VIGIL Server.
Camera information is displayed in the main portion of the
show the status of
Along with the status icons, camera settings are also
displayed. The camera recording frame rate, the recording
resolution, recording mode and compression quality are
Camera is currently recording.
Camera is currently stopped and not recording.
Camera is disabled.
At the bottom of the window, DVR information such as running time, number of Client Connections, current
Oldest / Newest Footage Dates are displayed.
Shows the time when the VIGIL Server was last rebooted.
Shows the CPU usage on the DVR.
Shows the amount of client connections to the DVR.
The total memory usage on the DVR.
Shows the date and time of the oldest/newest footage stored on the DVR.
window which turns on/off the camera sequencing on
The sequences must be configured on the
Uploads and applies an update file on the server. Select the .VGL update file and the update
This action will restart the server and take it temporarily offline.
Opens the Hardware Information window which provides some basic information about the Capture
recording.
Camera is currently stopped and not recording.
At the bottom of the window, DVR information such as running time, number of Client Connections, current
Shows the date and time of the oldest/newest footage stored on the DVR.