3xLOGIC VIGIL Client - Manual (Page 71)

3xLOGIC’s VIGIL Client - Users Guide Page 71
Doc# 12031914
13 Server Alarms
VIGIL Server DVRs can be configured to send alarms to VIGIL Clients. The IP address of the client computer
must be entered in the VIGIL Server settings before it is able to receive alarms. Please refer to the VIGIL
Server User’s Guide for details. When VIGIL Client receives an alarm, the Server Alarms window is displayed.
The Server Alarms window provides a listing of alarm events and allows quick playback of alarm footage. To
open the Server Alarms window, select Alarms from the menu of the main window toolbar.
Note: The Server Alarms window will automatically appear as a response to an alarm event if you
have Automatically Display Inbound Alarms From Server enabled in the Alarms tab of the settings
window.
Note: The TCP/IP port used by VIGIL Client to receive Server Alarms is 22830.
The Server Alarms window displays a list of alarms received by VIGIL Server DVRs.
Alarms are listed in a tabular form with the site name and IP Address, type of alarm, camera number, alarm
number, and the start and end date/time of the alarm. New alarms that have not yet been acknowledged are
shown in red. Acknowledged alarms are displayed in yellow.
Search Alarms Search for cleared alarms.
Acknowledge Acknowledges the selected alarm and changes its highlighted color to yellow.
Acknowledge All Acknowledges all visible alarms and changes their highlighted color to yellow.
Clear Clears the selected alarm from the Alarms window.
Clear All Clears all alarms from the Alarms window.
Suppress
Opens the Suppressed Alarm window where alarms can be suppressed so that no new notifications
from the suppressed alarm will display until the alarm suppression expires or is deleted.
Live Loads live video footage of the camera that corresponds to the selected alarm in the Live Viewer.
Playback
Plays back the video footage for the selected alarm. The playback footage will begin at the alarm
Start Time and end at the alarm End Time.