3xLOGIC VIGIL Client - Manual (Page 27)

3xLOGIC’s VIGIL Client - Users Guide Page 27
Doc# 12031914
Chat Treeview
VIGIL Server and Client include a chat feature to speak or write back and forth between VIGIL Clients
connected to VIGIL Servers. The Chat session is initiated by the VIGIL Client only and can be used to
communicate via voice or text chat. Double click on Chat in the Treeview to initiate a chat session with the
selected Server.
Note: For voice chat to be available and function correctly, audio settings for Chat must be
configured correctly in the VIGIL Server Settings window (see the VIGIL Server Users Guide for
more information).
Hands Free
Check Hands Free for VIGIL Chat to automatically detect the volume level and only send voice when
sound reaches a specific volume. Uncheck Hands Free to use the Talk button to manually start and
stop sending voice data.
Talk
When Hands Free is unchecked, click Talk to send voice data. Unclick Talk to stop sending voice
data.
Voice Detection
Graphs
The voice detection graphs provide a visualization of voice data detected in the chat session.
Send Text Sends a typed message. Type text into the textbox and click Send Text.
Sensitivity
Use the slide bar to adjust the chat audio sensitivity. To the left is less sensitive, to the right is
more sensitive. Note: Use the down
button to expand the Controls section.
Server Alarms Treeview
Double Click on the Server Alarms Treeview item to open the Alarms window for the selected server. Server
Alarm Polling must be enabled for this option to work.