3xLOGIC VIGIL Client - Manual (Page 20)

3xLOGIC’s VIGIL Client - Users Guide Page 20
Doc# 12031914
Recording Speed
Select the desired number of frames per second. Each bank has a set amount of FPS that can be set
to its cameras. Values will change depending on the recording speeds for other cameras within the
same bank.
Network Camera
Network cameras are automatically detected and the analog feed is disabled for that camera
number. Network camera speeds are independent of other cameras and do not change the
maximum allowable FPS for cameras belonging to the same camera bank.
Settings Tab
The Settings tab provides control over some of the basic behaviour of the DVR server.
Site Name
The name of the Site where VIGIL Server is located. The site name is included when saving still images.
Global Server Settings Tab
Auto-Start Recorder
When enabled, the DVR starts recording footage as soon as the VIGIL Server program is
launched. When disabled, the user must manually start the recorder using the controls in the
Recorder Controls window.
Network Logging Logs network activity that can be reviewed in the Network Log Analyzer.
Resolve Client Name
When enabled, client IP addresses are translated into their computer names for easier
recognition.
A/C Cameras
Enable A/C Cameras to set VIGIL Server to record footage from A/C powered cameras. Disable it
to record footage from D/C powered cameras.
Watchdog
When enabled, the watchdog circuit on the video capture card is used to verify that VIGIL Server
is responsive. If the software becomes unresponsive, then the watchdog will reboot the DVR
Limit Search to One
Day
When enabled, the Search window will be limited to performing searches for a single day only.
Client Connections Enter the maximum number of simultaneous client connections allowed.