3xLOGIC VIGIL Client - Manual (Page 35)

3xLOGIC’s VIGIL Client - Users Guide Page 35
Doc# 12031914
Patterns
Control the saved pattern of movement for the selected camera. Patterns are stored
within the camera.
Select a pattern from the drop-down menu and click Record. Use the other control buttons to
move the camera in the desired pattern. Once finished, click Stop. This will overwrite the existing
saved pattern. Select a pattern from the drop-down menu and click Run to begin the saved
pattern.
Tours A tour is a cycle of camera presets. Tour settings are stored within VIGIL Server.
Click Settings to open the Tour Settings window, where presets are added and set to run for a
specified number of seconds before going to the next preset.
Click Run to activate the tour. The camera will cycle through the presets in the Live Viewer
window. The tour can be ended by moving the camera or pressing Stop.
Note: Presets must be configured before a tour can be run.
Add Adds a preset to the tour.
Edit Edits a preset in the tour.
Delete Deletes a preset from the tour.
Save Saves changes made to presets.
Cancel Exits the Tour Settings window without saving any changes.
Enhancements
Settings on the camera that can be toggled on/off. These include Color, Sensitivity,
Backlight, White Balance and Auto Focus.
Enhancements can be selected via the Drop Down Box and turned on or off via the buttons.
Menu Some cameras have built-in menus that can be accessed and configured via this tool.
Displays the camera’s menu; it may take a moment to appear.
Exits the camera’s menu. You can also navigate to the Exit menu option and
click the Select button.
Camera menu navigation buttons.
Camera menu select button.